Table of contents

• What to look for when Choosing Ceramic Coating Application?
• How is a ceramic coating applied?
• What are the Pros and Cons of DIY Nano Ceramic Coatings?
• Advantages OF DIY Super Ceramic Coating
• Disadvantages of DIY Ceramic Coating Application

As car and motorcycle owners, we all want our vehicles to stay in pristine condition, just like the first day we drove them. However, with time and exposure to the environment, the paint on our vehicles begins to fade. This is where ceramic coating comes in. If you’re not familiar with ceramic coating, it’s a protective layer that can be applied to your car or motorcycle’s paint to protect it from damage and keep it looking like new.

Finding a reputable ceramic coating detailer in your area can be a challenge. Many people may not be aware of the cost associated with ceramic coating their vehicle. But it’s important to note that the cost can vary depending on the type of vehicle you have. For example, a motorcycle ceramic coating can cost around 15,000₹ while a car or SUV ceramic coating may range from 30,000₹ to 50,000₹. Ceramic coating is an investment in the longevity and appearance of your vehicle.

What to look for when Choosing Ceramic Coating Application?

Ceramic coating is a type of protective finish for the exterior of vehicles. The process involves applying a liquid polymer by hand, which chemically bonds with the vehicle through a technique known as nano-coating. This creates a strong and durable protective layer on the surface, which can help to prevent damage from environmental factors like UV rays, bird droppings, and tree sap.

1. Hydrophobic formula: One of the most important features of ceramic coating is its hydrophobic nature. This means that water will be repelled and won’t accumulate on the surface. Snow and ice won’t stick to the surface either.
2. Mud and dirt repellant: Ceramic coatings work much better than an ordinary paint job because it doesn’t allow water to accumulate on the surface. Moreover, dirt, dust, and mud smoothly slide off the surface, so you need not worry about it when going outside the city.
3. UV damage protection: Exposing your car to the sun makes the paint fade and look dull. This is caused by the UV rays of the sun, which react with the chemicals and fade the color. When it comes to ceramic coatings, they are UV-proof, which means they will protect your car from UV rays and not let your paint fade away, reducing the process of oxidation.
4. Long-lasting care: Adding a layer of ceramic coating to your car is like adding an extra layer of protection. The new coating bonds with the molecular structure of your car paint, and it cannot be easily removed, making it last longer, not for months, but for years. However, how long it lasts solely depends on the kind of maintenance that you provide.

Nanocoatings do not change the color of a vehicle’s surface or any appliance to which they are applied. Instead, they enhance the color. Therefore, it is important to ensure that your car or motorcycle’s paint is free from scratches and imperfections before applying the ceramic coating. For a detailed explanation of what ceramic coating is and how it works, you can read this article: Ceramic Coating for Cars: Review & Truth Unleashed.

How is a ceramic coating applied?

Now that you have chosen the right DIY ceramic coating for your car, it’s time to look into the installation process. Many people get nervous about DIY projects, but it can be easier than expected. At Super Ceramic Coating, we ensure that our clients do not run into any issues while coating their vehicles. Simply read the process below and follow the instructions.

Preparation: Before applying the DIY ceramic coating, ensure that your car has been washed and is free from any contaminants. This will allow the paint to be polished to a high standard and increase its longevity.

Installation: After the cleaning is done to install the DIY coating, follow the below steps

The Downside of Professional Car Detailing Services

Professional car detailing services come with several drawbacks. Firstly, the high costs associated with these services can be a major deterrent for many car owners, as the expenses can quickly accumulate, particularly for those seeking frequent detailing. Secondly, the time-consuming nature of detailing means that your car may be unavailable for use for an entire day or even longer for more extensive treatments, which can be quite inconvenient for individuals reliant on their vehicles daily. Lastly, the variable quality of service among different detailers poses a risk, as some may deliver exceptional results, while others might leave customers disappointed with subpar outcomes. Consequently, these downsides warrant careful consideration before opting for professional car detailing.

What are the Pros and Cons of DIY Nano Ceramic Coatings?

It basically depends on the amount of work that you are willing to do. When you compare the best A-grade ceramic coatings with the best DIY ceramic coating kits, the quality of each product is undoubtedly based on prep work and application. 

It is quite convenient to hand over this task to a professional, but you’ll need to pay a premium price. For some consumers, it only makes sense to go for professionally installed products. However, your comfort levels also matter a lot. So if you want to undertake this task, purchase a high-quality DIY Ceramic Coating Product, which is easy to install and has an exceptional hydrophobic effect. Also, ensure that the production company offers superior customer support with easy-to-follow instructions.

Another option that provides a similar level of hardness and protection as the professionally installed ceramic coating is a high-quality DIY ceramic coating product. The do-it-yourself formula is slightly different from the pro-grade version as it’s designed for easier installation and requires less prep work. However, like the professional product, it has its own set of pros and cons to consider.

Also Read In Detail: What is Ceramic Coating? The Benefits Of Ceramic Coating and Price

Advantages OF DIY Super Ceramic Coating

• Less Costly: It costs more than $1,000 to get this work professionally done. While on the other hand, a high-quality DIY nano-ceramic coating will cost about 90% less.
• Superior Hydrophobic Properties: DIY ceramic coatings offer immense shine and hydrophobic properties/
• Provides the same service in terms of length: On average, the professional, as well as the DIY products, offer approximately the same level of protection for the same period.
• Exceptional Customer Support: Well, at least from us. You can contact us with any queries you have.

Disadvantages of DIY Ceramic Coating Application

• It takes effort to prep the vehicle: There is no way to sugarcoat this! If you want great results from any paint protection product, you’ll have to do some prep work in advance. DIY ceramic kits are no different in this aspect, and so it can be labour-intensive. The quality of your paint surface will primarily determine how much prep work would be required.
• Some inferior products on the market: Like the high and professional-grade coatings, some are better than others. The DIY segment is packed with inferior products with exaggerated claims, so do thorough research before you purchase.

Conclusion:

As mentioned above, it is very easy to DIY ceramic coating. However, it does require a certain amount of care and some preparation. Take out some free time to do it properly, and your car and motorcycles will have the desired layer of protection. 

Remember, while using wash mitts or sponges, or brushes, it’s crucial to be gentle and use ample soap to prevent causing swirls or scratches on your car’s paint. The soap plays a significant role in dissolving dirt, so the primary function of your mitt is to dispense the soap and guide the suds off the surface with minimal pressure.

In this article, we’ll explore the contrasts between wash mitts, sponges, and brushes and provide suggestions to help you find the optimal type for your car cleaning needs.

Sponges: A Legacy with Downsides

Sponges have been the traditional go-to option for many vehicle owners due to their affordability and accessibility. The design of a sponge, being soft and porous, seems like a good fit for car washing on the surface. However, this is not always the case.

The problem lies in the sponge’s structure. Its flat surface tends to collect dirt, grime, and small particles. As you continue washing your car, this trapped dirt can be dragged across the vehicle’s paint, creating minute scratches known as swirl marks. The damage might not be noticeable at first, but over time, these tiny scratches can accumulate and dull your car’s finish.

Moreover, sponges don’t rinse clean easily, meaning that the dirt and debris from your car can stay embedded in the sponge and potentially cause more damage in subsequent washes.

Brushes: Hard Bristles, Hard Consequences

Brushes, particularly those with hard bristles, present another set of challenges. They are often favored for their ability to scrub away tough dirt and stains. However, their efficiency comes at a cost to your car’s paintwork.

The stiff bristles on most brushes can be overly abrasive, especially on the clear coat that protects your car’s paint. This clear coat is designed to be the frontline defense against weather, UV rays, and other environmental factors. However, it is not invincible and can be damaged by rough handling or harsh materials.

Consistent use of hard-bristled brushes can cause micro-abrasions on the clear coat. This not only dulls the shine of your vehicle but also weakens the coat’s ability to protect the underlying paint. Consequently, your vehicle becomes more vulnerable to the elements, which can cause fading and other forms of paint damage.

Enter the Microfiber Washing Mitt Cleaning Glove.

The Microfiber Advantage

Microfiber Car/Bike Washing Mitt Cleaning Gloves offer a perfect blend of functionality and safety for your vehicle’s paintwork. Made from thousands of ultra-soft microfibers, each acting as a magnet, lifting and trapping dirt particles away from the surface to prevent scratches.

In addition to providing a gentle clean, microfiber mitts have an incredible absorption capacity, holding more water and soap than a traditional sponge or brush. This ensures an even and thorough clean every time you wash your vehicle.

Plus, the glove design is not only comfortable for the user, but it also provides greater control over the washing process. You can reach nooks and crannies of your vehicle, which would be hard to clean using a sponge or brush.

Introducing the Ultimate Microfiber Wash Mitt Gloves: Superior Quality Meets Unparalleled Performance

In the realm of car care, we take pride in introducing our flagship product – the Ultimate Microfiber Wash Mitt Gloves. This high-performance washing mitt is the perfect fusion of a gentle lamb’s wool mitt and a chenille microfiber mitt, offering an unmatched car-washing experience.

Constructed with microfiber, our washing mitt not only cleans exceptionally but also promises excellent durability. It washes up beautifully, retaining its softness and efficiency wash after wash. Moreover, the glove design provides a secure grip, ensuring comfort and control during the entire washing process. With its dense structure, the microfiber is highly absorbent, facilitating quicker and more efficient scrubbing.

Compared to ordinary sponges, our mitt has approximately twice the surface area, enabling you to clean a larger section of your car in one sweep. This feature drastically reduces your washing time, making car care a less daunting task.

But the benefits don’t end here. Our top-notch microfiber cloth boasts a life span of 1 to 2 years, offering exceptional value for your money. The extended durability of the mitt reduces cleaning costs over time and contributes to environmental sustainability by minimizing waste.

At The End

When it comes to maintaining your car’s appearance, your choice of washing tool makes a significant difference. The Microfiber Car/Bike Washing Mitt Cleaning Glove has proven to be a game-changer, offering a safe, efficient, and effective cleaning solution. Not only does it protect your vehicle’s paintwork from scratches, but it also delivers a thorough clean that leaves your car looking like it’s just driven off the showroom floor.

Invest in a Microfiber Car/Bike Washing Mitt Cleaning Glove today, and experience the difference in your car washing routine. It’s not just about washing your car—it’s about preserving your prized possession.

Ceramic coating sprays, on the other hand, are much easier to apply. But they offer a low level of protection, and the protection won’t last as long. First, let’s understand what ceramic coating is, and then explore the different levels of ceramic coating protection.

So, What Exactly Is Ceramic Coating?

Ceramic coating is a liquid-based solution that forms a protective layer over your car’s paint job. This layer is highly resistant to scratches, UV rays, and other environmental damage. In addition to that, it also adds a glossy finish that can last for years. It is a popular choice for car owners who want to protect their car’s paint job and keep it looking new for as long as possible.

There are two parts to this question. One is ceramic, while the other is coating. So let’s examine them separately.

Ceramic

Ceramics are created by taking “clay” and firing it in a furnace at temperatures exceeding 1000 °C. After the firing process, a glaze is sometimes applied to create a smooth, glossy finish. Depending on the type of clay and firing temperature, different “colours” can be achieved.

Ceramics are found in our everyday lives, from bricks and glass to plates, tiles, and toilets. Also, they can be used for a wide range of things, from high-performance engines and phone lines to heat coatings on the Space Shuttle, aerospace parts, and car paint.

Coating

A coating is a process in which a thin layer of material is applied to the surface of an object to enhance its appearance and provide protection, or lubrication. The material used for coating can be a liquid or a solid, such as paint, plastic, rubber, or metal. So all in all, a ceramic coating is a man-made substance designed to protect or improve the surface it’s applied to. This broad definition can be confusing because it doesn’t say what the coating is good for or what its features are.

Different Types of Ceramic Coatings

This may be the first time you’ve heard of it, but there are various types of ceramic coating for your vehicle, all with different materials, formulations, and application techniques. They can serve as a barrier against acid rain and swirl marks, but they can’t prevent rock chips as a transparent bra would. They are superior to waxes and way superior to spray coatings when it comes to lifespan. All ceramic coatings are intended to protect a car’s paint, wheels, glass, and other parts. They are even more effective than auto wax.

The following are the different materials from which ceramic coatings are made:

Liquid Quartz

Liquid quartz consists of silicon dioxide (SiO2) and other synthetic components. It hardens on a surface and remains hard for a predetermined period of time. Quartz ceramic coatings come in different grades, from 5% SiO2 (used in spray coatings and waterless wash products) to 70–90% SiO2 (found in professional-grade nano-ceramics like our Super Ceramic Coating). The higher the percentage of SiO2, the harder the quartz layer of the coating becomes, and the better it is at providing protection against water, dirt, and other contaminants.

A Polymer Substance

Polymers or epoxy are good choices for ceramic coating sprays because they stick well to paint-clear coatings. This bond is created through a spray-and-wipe technique. Polymers stick to porous surfaces, but they don’t get into the tiny bumps that are often on clear coatings, plastics, metals, and glass.

Hybrid Coating

Imagine combining the best of polymer coatings with quartz for enhanced protection. That’s what hybrid ceramic coatings are all about. They are usually applied with a spray or aerosol. These products claim to offer the best of everything, but in reality, they are often cheaply made with low SiO2 percentages and multiple hydrophobic polymers. Are they better than wax or sealant products? It’s hard to say; the jury is still out.

Different Levels of Ceramic Coating Protection

Each type of ceramic coating has its own advantages and disadvantages. Now that we have covered the basics of different ceramic coating formulations let’s take a look at what products are available, the type of protection they offer, and who they are best suited for.

DIY Nano Ceramic Coating

Super Ceramic Coating is the undisputed leader in DIY nano ceramic coatings, with an impressive 80% SiO2 percentage. Professional-grade ceramic coatings need more SiO2 (93%), and only a professional detailer can put them on. Ceramic coatings are put on as liquids and then hardened, making a layer of protection over the paint. This layer is highly resistant to scratches, UV rays, and other environmental damage. It also adds a glossy finish that can last for years. Our customers have consistently given Super Ceramic Coating top marks for its strength, durability, and longevity, lasting as long as 2–5 years.

Also Read: What is Ceramic Coating? The Benefits Of Ceramic Coating and Price

Ceramic Spray Coating

Ceramic coating sprays, on the other hand, are much easier to apply. Despite the fact that they provide a lesser amount of protection, ceramic coating sprays are much more cost-effective and can be applied by anyone.

These solvent-based sprays contain around 10–14% SiO2, way less than nanoceramic coatings. They can make ceramic coatings last longer and be more durable by giving them a boost. Also, each of these products can be used on its own to protect different surfaces in a reliable way. The hydrophobic properties of these sprays usually last for only a few weeks; however, many consumers opt to apply the product on a monthly or bi-monthly basis.

Hybrid Coating

You can find hybrid sprays on Amazon or Flipkart that have a blend of SiO2 and TiO2 (Titanium Dioxide). Some of these products are a mix of SiO2 and synthetic spray wax. But, if it contains spray wax, it won’t work as well.

The reason is that SiO2 (silica dioxide) is meant to harden and create a flat layer of protection. This is what gives ceramic coatings their hydrophobic properties. When you mix a spray wax or sealant with the SiO2 blend, it decreases the SiO2’s ability to harden and form that layer. So all in all only choose hybrid coatings if you don’t have any other options available to you.

Ceramic Coating vs Ceramic Spray Coating: Which One Should You Choose?

Now let’s get to the real point. Which is the best, or more accurately, which one is best suited for you? It all depends on what you are looking for in a ceramic coating product. Longevity? Fast action? easy to use? price or anything else. For each type of consumer, we recommend the following:

If you are looking for something that lasts longer – Ceramic Coating!

If you’re looking for long-term protection, a nanoceramic coating is a perfect choice. It protects well and lasts a long time, and you don’t need any special tools to put it on. Its nano-sized particles ensure maximum coverage and protection, giving you peace of mind. If you’re looking for the best bang for your buck, a DIY ceramic coating is a way to go. It’ll last you anywhere from 2 to 5 years. The spray usually costs around ₹700 – ₹1300 for 3 applications on a regular hatchback. If you want it to last, you’ll need to reapply it every 3 months, which works out to 4 bottles every 2 years, or nearly ₹5000. This is why Super Ceramic Coating is an excellent option, and at only ₹1450 it includes everything you need for a successful application. Plus, it lasts for up to 2–3 years on average, a claim that has been verified by our thousands of customers.

If you want something that is easy to use – Ceramic Spray Coating

If you’re looking for an easy-to-use, sprayable product to protect against dirt, the ceramic spray coating is your best bet. It’s simple to apply and can last up to six months before needing to be reapplied; there’s no need to remove it from the surface. Keep in mind that it won’t layer on top of other applications, so it’s best to use it every three to four months. This is why Super Ceramic Coating is an excellent option, and at only ₹1450 it includes everything you need for a successful application. Plus, it lasts for up to 2–3 years on average, a claim that has been verified by our thousands of customers.

Table of contents

• What Is Matte Paint?
• What Are The Different Types Of Matte Finish?
  • True Flat Matte Finish
  • Satin Matte Finish
  • Semi-Gloss Matte Finish
• Understanding Matte Finishes: Myths and Facts
• Taking Care of a Matte Finish
  • A Professional-Grade Matte DIY Ceramic Coating

A matte paint finish stands out and is unique in a world dominated by gloss and sheen. In recent years, the matte appearance has grown significantly. What does a matte paint finish actually mean? Is the paint different, or is it the way it’s applied that generates the matte look? Is it possible to mimic a matte finish or change a glossy finish without having to repaint a car, and are there any materials that look better with a matte surface? Let’s delve deeper into this subject.

What Is Matte Paint?

Matte finish is not paint, but instead a surface coating that can be applied over existing paint or other surfaces. It is usually made up of a combination of materials including resins, waxes and silicone-based emulsions. These components are designed to create a flat, non-reflective surface that has a unique look and feel. A matte finish is different from other finishes because it doesn’t have a shiny look. It looks unique and has become popular recently. When light hits a matte finish, it spreads evenly across the surface instead of reflecting back like glossy paints do. This creates an interesting look that stands out from the crowd. Matte finishes also require less cleaning than glossy ones since they don’t show dirt or smudges so easily. Another advantage of matte paints is that they can be used to mimic the look of other materials. For example, you can use a matte paint to create a wood-like finish or even give metal objects an aged appearance. This can be very useful when it comes to customizing objects or creating unique looks.

The car paint’s surface is coated with a clear coating to give it a glossy appearance. The purpose of a typical clear coat is to cover any holes or small dips left by the paint’s coarse pigment. This results in a surface that is smoother and deeper. This is what gives the gloss appearance. The matte paint job includes a clear coating as well. However, the final coating is left with tiny dimples rather than filling and leveling the uneven paint. As a result, the paint has a dull or matte texture and cannot reflect light. Any paint hue can be “matted,” since the method and kind of transparent coating used will determine how the matte effect is created. However, most of the matte-painted cars from Mercedes, BMW, Aston Martin, and other premium brands are white or black.

What Are The Different Types Of Matte Finish?

Another misconception is the idea that all matte finishes are equivalent. On the other hand, there are several shades of matte paint finishes, each of which has a distinct luster—or lack thereof. In most parts of the world, three different kinds of matte finishes are popular.

True Flat Matte Finish

The True Flat Matte Finish is a kind of matte finish you should get for the ultimate covert appearance. The most typical sort of matte finish is this one. It has the same appearance as when bare metal is covered with a can of flat black spray paint. It tends to have no gloss and is unpolished, gritty, and coarse. A natural flat finish will make shadows, but there will be no reflection when you look at the paint. The biggest issue with a real flat matte finish is that it gives the car a slightly unfinished appearance. Automobile enthusiasts work around this problem by adding accessories to the vehicle, such as wheels, bumpers, grilles, and/or badges, that highlight the matte surface. This is the “blackout” style that auto dealers worldwide are starting to adopt. In this case, the factory will add gloss black accent pieces to the car. This will give the car some contrast while keeping its cool look.

Satin Matte Finish

A satin matte finish is a fantastic place to start if you’re searching for something in the middle of mild and crazy. This combines the best of both worlds for you. Without the reflective qualities that matte is known to generate, it offers the shine of a gloss finish. The majority of factory-direct automotive paint jobs have a satin finish. Even though it might not seem as “stealthy” as the flat matte surface, the satin finish truly pops, especially in natural light or when illuminated by LEDs. Automotive painters can achieve the satin finish by using a clear specially prepared to generate the sheen and reflective blocking. Others swear by spraying the base coat first, then the clear and flat clear combination.

Semi-Gloss Matte Finish

People who want to push the limits of glossy paint coatings should go for the semi-gloss matte. The best way to explain the difference between satin and semi-gloss is to use white plastic and eggshell as an example. Satin is like white plastic, it doesn’t reflect light much and has a smooth, matte look. Semi-gloss is more like eggshell, it reflects light a bit and looks shinier than satin. Semi-gloss paint is a fantastic option for individuals searching for a user-friendly matte because it is not as “high-maintenance” in care and upkeep.

Understanding Matte Finishes: Myths and Facts

As we talked about briefly in the beginning, there are a lot of myths and lies about matte finishes. There are other facts that need to be emphasized as well, though. So, let’s go over some myths and facts about matte finishes, and if you heard any other myths that doesn’t covered here, go ahead and look them up on your own.

• A Matte Finish Cannot Be Waxed

It’s true. As we discussed above, a matte finish does not have the flat, smooth finish that wax is intended to be applied to. The purpose of using wax is to protect while enhancing the shine of the clear coat/paint combination. You’ll get a slimy mess if you try to apply your dad’s old can of wax on the matte surface.

• You Must Make Your Own Car Shampoo to Wash a Matte Finish

Some people state that the only method to clean matte finish paint jobs is to make your own homemade concoction, which usually involves combining an acidic substance like vinegar with a detergent like a dish soap. Well, that is not entirely true.

Today’s ready-to-use vehicle shampoos frequently contain wax, primarily used as a lubricant during the washing process. These waxes can and often do leave behind a residue that gets “buffed” into the paint surface as it dries. Using this kind of wax on a matte finish clear coat will ruin the look and appearance, as we stated above. But don’t go out and apply the detergent or some vinegar thought. In actuality, combining vinegar, which is pH negative or acidic, with detergents, which are pH positive or a stronger base, only serves to further damage the finish.

Several car shampoos are available in the market that is wax-free and pH-neutral (which is kind to all automotive surfaces), like our own Foam Wash Shampoo. This lets you gently wipe away dirt, grime, and other debris without leaving a wax layer or what some people might consider a subpar matte sealant. It is important to avoid using automatic car wash facilities if your car has a matte finish. There, vehicle soap is always wax-enhanced, which won’t work well with your matte finish. Additionally, it is not a good idea to wash your vehicle there if it has metallic paint.

• Repairing Scratches and Cuts on a Matte Finish is Almost Impossible

Unfortunately, THIS IS TRUE. The durability and susceptibility to scratches and paint chips of matte finishes are identical to those of standard gloss paint jobs. However, the matte finish of the car is more difficult to fix than the gloss clear coat, which may be easily buffed during paint correction. In fact, if the finish is damaged, extensive repair is typically required. Even a small stain from bird droppings that is neglected for too long can cost thousands of rupees to fix.

• Without a Clear Coat, Matte Paint is Just Normal Paint

Absolutely not. In rare instances, an aftermarket matte paint job might not have a clear coat, but if you get it from the manufacturer, it will undoubtedly have one. Actually, the clear coat’s minuscule flaws and “dimples” are what give factory matte paint its flat appearance. Make sure a matte clear coat was applied over the pigment layer of paint if you had a third party paint your automobile or motorcycle matte in a booth. Let me assure you. You will regret it if you don’t have a clear coat.

Taking Care of a Matte Finish

Let’s say if you spend money on a matte finish; it only makes sense to safeguard it from harm. Make it easier to clean, and maintain the matte’s appearance.  How can a matte finish be protected if you can’t use car wax and paint sealants aren’t all that great? There is one excellent possibility that you should think about.

A Professional-Grade Matte DIY Ceramic Coating

A nano-ceramic coating like Matte Ceramic Coating DIY Kit is a superb solution to safeguard and improve the appearance of your matte finish without adding gloss or creating a shiny impression. By filling up those minute flaws with a clear but incredibly durable layer of quartz or glass, the matte ceramic coating is designed and made to adhere directly to the clear matte clear coating. The ceramic coating then creates an incredibly flat layer after curing. With each extra layer of coating, that defense becomes stronger, improving the defensive qualities without raising the shine. The matte surface stands out because it draws attention to what is behind that layer. The ceramic coat is then given a top coat, which creates an ultra-slick surface. It makes it less likely that things like water, dirt, bug guts, tree sap, and other sticky things will stick to the coating. This process creates hydrophobic qualities, which prolong the time the vehicle appears cleaner. Additionally, it makes washing your vehicle an easier task. Learn more about the ceramic coating benefits here.

Table of contents

• What Is Paint Protection Film?
• The Science Of Paint Protection Film!
• What Kinds Of Paint Protection Films Are There?
• What Distinguishes PPF and Vinyl From One Another?
• How to install PPF Installation? can you apply it at home?
• What Is The Lifespan Of Paint Protection Film?
• The Advantages And Disadvantages Of Paint Protection Film
• Let’s Talk About Clear Bra
• Benefits of Applying Ceramic Coating on PPF
• Our Final Verdict On PPF

When it comes to protecting your vehicle from the elements, you have plenty of options. From waxes and sealants to ceramic coatings and paint protection films (PPF), you can choose from a wide range of products that offer varying levels of protection. One question many people ask is: can I apply ceramic coating over PPF? In this blog post, we’ll explore the benefits, drawbacks, and best practices of doing so.

Paint Protection Film has been gaining significant prominence recently. The thickest layer of defence is a polymer or polyurethane film that is incredibly strong despite being quite thin. In addition to keeping your vehicle’s clear coat safe against chemicals, UV rays, acid rain, and road debris, it can save you hundreds of dollars in autobody repair if the paint is damaged by road debris.

The internet is a wealth of knowledge regarding paint protection film. Some of it is true, while other parts are complete, grade A BS. If you look up the ceramic coating, you’ll find similar false information. Let’s investigate the reality behind paint protection film. Does it actually offer scratch protection? Can PPF really cure itself? In this article, we will dispel myths, rumours, and outright false information about paint protection films.

Buy Our PPF Ceramic Coating Here!

What Is Paint Protection Film?

It’s vital to understand paint protection film’s history to properly understand its potential. PPF, like many contemporary innovations, was created to address a specific issue. During the Vietnam War, the United States Department of Defense experienced issues with shrapnel, trees, and other debris damaging the rotor blades on several of their helicopters. The engineers at 3M were charged with developing a protective layer that was both thin and sturdy. The remedy was known as helicopter tape or a custom urethane film made for function rather than aesthetics.

The PPF of today is a far cry from the 3M helicopter tape. It is a translucent, colourable, and even custom-textured thermoplastic urethane that can be used to enhance glossy or matte paint jobs. It is a transparent paint protection film that can be bought in various grades and thicknesses and is applied by skilled experts with accuracy and precision. In fact, modern paint protection film offers several advantages, such as:

• Resistant to pollutants and acidic corrosion (like bug guts and bird droppings)
• Defends a painted surface against mineral deposits, acid rain, and gentle and hard water stains
• Reduces UV-induced oxidation of factory paint
• Impedes the impact of small rocks, gravel, tree branches, and other sharp items on painted surfaces.
• If a protective coating is scratched or hit, it will eventually heal.
• Lasts for up to 10+ years

The Science Of Paint Protection Film!

Let’s go technical now. The majority of vehicle paint protection films share a similar basic foundation. It is divided into four distinct layers:

1. Clearcoat: Clear coat is a protective layer that is applied over the basecoat of paint on a vehicle. It is a clear resin-based coating that provides a layer of protection to the underlying paint and helps give the vehicle a glossy finish. It has a thickness of 0.5 mils (0.0132mm). All paint protection products are applying above the clear coat.
2. Polyurethane: Polyurethane makes up the majority of PPF. This is 6.0 mils thick and gives the paint protection film strength and depth (0.152mm).
3. Acrylic Adhesive: The acrylic adhesive is the layer below. It is slightly thinner, 1.6 mils thick (or 0.040mm). This provides the strength of the adhesion.
4. Polyester Release Liner:  The polyester release liner serves as the PPF’s base layer. It has a thickness of around 3.0 mils, or 0.076mm. The substance that creates the binding to the vehicle surface is exposed once removed.

What Kinds Of Paint Protection Films Are There?

There are three main types of paint protection film: self-healing, permanent, and optically clear. Self-healing films are the most popular type because they’re relatively easy to install, last for several years with proper care, and can repair themselves when exposed to heat or intense sunlight. Permanent films provide greater protection than self-healing films but require regular maintenance to keep them looking their best. Optically clear paint protection film is the most expensive option. It creates a barrier that is almost invisible and keeps contaminants from getting into your car’s paint and damaging it. This type of film also requires frequent cleaning to maintain its clarity and effectiveness. Depending on the size of your vehicle, you may need several rolls of film to cover the entire body. No matter which type you choose, be careful when installing and taking care of your paint protection film to make sure it works and lasts.

What Distinguishes PPF and Vinyl From One Another?

Another misunderstanding is the distinction between vinyl, commonly known as a vinyl wrap, and paint protection film, or PPF. PPF and vinyl are both popular options when it comes to protecting your vehicle’s paint job. While they may have similar applications, they differ in a few key ways. PPF is an optically clear film that is made of high-grade polyurethane and often used on cars as protection against chips, scratches and other environmental damage. It can be applied directly to the car’s paint, forming a protective layer. Vinyl, on the other hand, is a thicker material that can be used to customize your vehicle’s look and feel. It comes in many different colors, patterns, textures and finishes and can easily be removed when desired. Both PPF and vinyl offer great protection for your vehicle, but PPF is the better choice if you want to maintain the original look and feel of your car. It’s also much more durable than vinyl and will last longer in harsh conditions. Additionally, PPF can be reapplied in case it starts to wear off or gets damaged. Vinyl, however, cannot be easily repaired if it gets damaged. Ultimately, both PPF and vinyl offer great protection for your vehicle, but it’s important to know the differences between them in order to choose the best option for your needs. Here is a real-world illustration. The picture on the right side shows a car with an extremely amazing vinyl wrap. It is a branded vinyl applied over a particular vehicle’s factory paint. It resembles a “sticker” but it also shields the paint below from damage.

How to install PPF Installation? can you apply it at home?

Yes, it is possible to apply paint protection film (PPF) at home, but it can be a challenging and time-consuming process. If PPF is installed incorrectly, it will be visible even with just one small blemished area. The integrity of the film will also be compromised. Incorrect installation can even leave vulnerable areas of the vehicle exposed to hazards. Your best option is to have a certified installer do your installation work.

To apply paint protection film at home, you will need the following tools and materials:

• A roll of PPF
• A spray bottle filled with soapy water
• A squeegee or hard plastic card
• A sharp blade or knife
• A heat gun or hair dryer

Here are the steps to apply paint protection film at home:

1. Clean the surface of the car thoroughly, making sure to remove any dirt, dust, or debris.
2. Measure and cut the PPF to the desired size, using a sharp blade or knife.
3. Spray the surface of the car with soapy water to help the film adhere to the surface.
4. Peel the backing off the PPF and position it on the surface of the car.
5. Use a squeegee or plastic card to smooth out the film and remove any air bubbles.
6. Use a heat gun or hair dryer to soften and stretch the film, if necessary.
7. Trim any excess film with a blade or knife.

Keep in mind that applying paint protection film requires a steady hand and a lot of patience. It can be difficult to get the film to lay flat and remove all the air bubbles, and it is important to work slowly and carefully to avoid making mistakes. If you are not confident in your ability to apply the film properly, it may be best to have it installed professionally. The success or failure of a PPF depends on proper preparation, installation, and aftercare, just like any other paint protection solution. Although each manufacturer’s installation procedure is distinct, the process generally involves the following steps:

Step 1 – Preparation for the Installation of Paint Protection Film

A PPF must be glued to a surface to provide protection. This is only made possible when that surface is spotless, damage-free, and debris-free. However, because a paint protection layer is transparent, the paint’s state or surface below significantly impacts how brilliant the final product will be. Along with this, also perform the below procedures before the application.

• A decontaminating car wash
• Paint correction
• Final Wipe Panel Wipe Down

Step 2 – Cutting The Material In Advance

There are two different ways to apply the PPF. A plotter or other device that pre-cuts the material into smaller, precisely sized parts, such as fender or door edges, is used by most professional PPF installers.

This saves money for the client and the installer, reduces waste, and, of course, conserves resources. Additionally, it is essential to speed up PPF installation and improve fit in narrow areas like door jambs, headlamps, and grilles.

The second technique employs bulk film. Basically, it’s utilised when an installer doesn’t have a plotter; nonetheless, it usually results in excess material being used, more time is required, and a less precise or accurate installation.

These issues can be reduced when employed by a skilled installer. Some are so outstanding that they can be manually cut to suit spoilers, side mirrors, the hood, deck lid, and rocker panels, among other things.

Step 3 – Fitting

The installer will pre-fit the automobile protection film to verify correctness. The market for paint protection film is flooded with numerous manufacturers and installation methods, such as a clear bra that simply covers the front of the car. The painstaking and precise technique of attaching the transparent bra to the painting ensures that the material will fit each piece and link or merge with one another with minimal gaps.

While this does extend the overall procedure’ duration a little, it will ultimately protect the paintwork and other portions of the car from rock chips and minor scratches, which can be quickly repaired with self-healing PPF.

Step 4 – Spraying The Fitting Solution

A fitting solution is an activator that enables the transparent bra or PPF to adhere to the surface. Spraying this substance over the painted surface and on top of the PPF activates the adhesive, which essentially functions as glue and binds firmly to the surface.

Once more, each brand of PPF has suggested properties for the appropriate solution, some of which can range from pure water to chemically-activated chemicals. This aids in its adhesion to a car’s paintwork, which helps to block UV radiation, oxidation, corrosion, and, eventually, the growth of rust.

Step 5 – The Final Fit and Application

The magic happens at this point. The skilled PPF installer will precisely fit the PPF by gliding it. It involves fitting, spraying, moving, squeezing bubbles, and other steps. The installer will use a squeegee to smooth down any wrinkles or bubbles in the PPF once it is in its precise position. The PPF clear bra offers great sealant or surface protection on the automobile’s exterior once it has bonded to the paint surface, especially against a scratch, bird dropping, or rock chip.

Step 6 – Drying

Drying is the last step in installing a transparent bra or PPF. There are several ways to do this, either by employing a particular drying method or over time. Most professional PPFs are heat-activated by being placed in a heat chamber or using a heat gun. A very tight fit is produced by restricting the material and, in essence, activating the “glue.”

What Is The Lifespan Of Paint Protection Film?

The lifespan of paint protection film (PPF) can vary depending on a number of factors, including the quality of the film, the type of maintenance it receives, and the conditions in which it is used. In general, high-quality PPF can last for several years with proper care.

Some manufacturers of PPF claim that their products can last for up to 10 years or more, while others may only offer a limited warranty of a few years. It’s worth noting that the lifespan of PPF can also be affected by factors such as the amount of sunlight and heat it is exposed to, as well as the frequency with which it is washed and waxed.

To get the most out of your PPF, it is important to follow the manufacturer’s recommendations for care and maintenance. This may include washing and waxing the film regularly to keep it clean and clear, and repairing any damage that may occur. If you notice any signs of wear or discoloration, it may be time to consider having the film replaced.

The Advantages And Disadvantages Of Paint Protection Film

We’re here to present facts, not smoke and mirrors. And it’s still true that not everyone should use paint protection film. Although it’s a terrific way to lessen scuffing, rock chips, and other surface damage, there are certain advantages and disadvantages to consider too.

Advantages Of Paint Protection Film

• Protection: The primary benefit of PPF is its ability to protect the paint on your vehicle from damage. It can help to prevent chips and scratches caused by road debris, as well as protect against fading and discoloration due to exposure to the sun and other elements.
• Durability: PPF is designed to be durable and long-lasting, and can help to preserve the appearance of your vehicle for many years. With proper care and maintenance, high-quality PPF can last for several years or more lasting up to 10 years or longer when paired with a high-quality PPF nano ceramic coating.
• Ease of maintenance: Because PPF is applied to the surface of the paint, it can help to keep the paint underneath looking newer for longer. This means that you may not need to wax or polish your vehicle as often, which can save you time and effort.
• Customization: PPF can be applied to specific areas of a vehicle, such as the hood, fenders, and bumper, allowing you to customize the level of protection to your needs. It can also be applied to non-traditional surfaces, such as the headlights or grille, to protect them from damage.
• Resale value: By protecting the paint on your vehicle, PPF can help to preserve the resale value of your car or truck. A well-maintained vehicle with a preserved paint job is often more attractive to potential buyers.
• Improved engineering and technology compared to earlier generations: no yellowing and increased hydrophobicity.

Disadvantages Of Paint Protection Film

There are a few potential disadvantages to using paint protection film (PPF) on your vehicle:

• Cost: PPF can be expensive, especially if you have a large vehicle or want to cover a significant portion of it. The cost of installation can also vary depending on the complexity of the job and the location of the shop.
• Maintenance: PPF requires regular maintenance to keep it looking its best. This includes washing and waxing the film to keep it clean and clear, as well as repairing any damage that may occur.
• Discolouration: Over time, PPF can become discolored or yellowed due to exposure to the sun and other elements. This can be especially noticeable on darker-colored vehicles, and can be difficult to remove.
• Limited coverage: PPF is typically only applied to certain areas of a vehicle, such as the hood, fenders, bumper, and mirrors. This means that other areas of the car, such as the doors and side panels, may still be vulnerable to chips and scratches.

It’s worth noting that these disadvantages are not unique to PPF and can also apply to other types of protective coatings or films. If you are considering using PPF on your vehicle, it’s important to weigh the potential benefits and drawbacks carefully before making a decision. PPF is expensive; there is no way to sugarcoat this. It represents a financial investment in the calibre and condition of your car. Working with a PPF-certified dealership or approved detailer is always recommended.

Let’s Talk About Clear Bra

A clear bra is a dedicated paint protection film that is applied to the front of a car, truck, SUV, or motorcycle. It is a technologically advanced polyurethane substance that adheres to metal, plastic, aluminium, Chrome, and even headlamp covers. It is put on the car’s front end, covering the front bumper, the paint, the grille, the headlights, the splitter, and even the front part of the hood and front fenders. The application’s location is referred to as the “bra.”

Back in the supposed good old days, it was typical for auto enthusiasts to cover the front of the car with leather or a durable vinyl-based material to achieve the same result: to protect the vehicle paint.

Benefits of Applying Ceramic Coating on PPF

There are several potential benefits to applying ceramic coating on top of paint protection film (PPF):

1. Increased Depth and Shine: When a nano-ceramic coating dries, it becomes a thin layer of glass that is just as robust as quartz, increasing depth and shine. This enhances the paint’s brilliance beneath the PPF, increasing the depth of the paint below, whether it has a gloss or matte finish.
2. Enhances Hydrophobic Properties: “hydrophobic” refers to a surface’s capacity to repel water. In addition to creating optically cool water shedding and beading, it also lessens the likelihood that dust, pollen, and other impurities will stick. If you hate pigeons, for instance, and one of them leaves a deuce on your car, a ceramic-coated PPF makes it easy to clean up the mess.
3. Increased Lifespan: By applying ceramic coating on top of paint protection film, the coating becomes more durable and resilient while retaining the PPF’s ability to heal itself.
4. Easy maintenance: Ceramic coatings are known for their ability to repel water and dirt, which can make them easier to maintain than traditional waxes or sealants. When applied on top of PPF, a ceramic coating can help to keep the film looking clean and clear, even after regular washing and drying.

Also Read: Can You Apply CERAMIC COATING OVER PAINT PROTECTION FILM?

Our Final Verdict On PPF

On the market, there are as many different types of paint protection film as there are grades of car wax, ceramic coatings, and paint sealants. Consider the following if you’re thinking about investing in a top-notch PPF.

Complete due diligence: Before making any significant purchases, ensure you’ve researched the item you’re considering. This is especially true for individuals who apply paint protective film.

Does the PPF Deliver What It Promises: As a sector, the PPF is less subject to tricks and marketing buzzwords. To make sure PPF performs as the manufacturer says, it’s crucial to confirm through third-party reviews and research into the technology employed in it.

Instant Healing PPF: The capacity of paint protection film to repair itself after minor damage or scratches is arguably its strongest feature. Make sure your PPF is an instant healing one. If you have to take your vehicle to the installer every time you get a small scratch, this will increase your overall expense and add time.

In conclusion, paint protection film is an excellent way to protect your vehicle’s paint from dirt, debris, and scratches. With the right PPF and ceramic coating combination, you can create a barrier that will give your car a showroom-like shine for years to come. Before investing in any type of paint protection film, be sure to do your due diligence to make sure you get the best product for your money. With the right PPF and ceramic coating, you can rest assured that your vehicle’s paint will remain in pristine condition. The added bonus of ceramic coating on top of PPF gives your car an even greater level of protection, enhancing its hydrophobic properties and increasing its lifespan.

Table of contents

• Thermal Barrier Protection From UV Rays
• Makes Your Vehicle Age Like A Fine Wine
• Preventing Your Vehicle From Rusting
• Protection From Bird Doodoos!
• Protection From Acid Rain
• Hydrophobic In Nature, Thus Easy Cleaning

Like most vehicle owners, you want to keep your car or motorcycle looking as good as new for as long as possible. But keeping it polished and waxed can be a hassle. That’s where ceramic coating comes in. Ceramic coating is a protective sealant that bonds with your car’s paint, providing protection from environmental calamities. It also makes polishing and waxing much less necessary, saving you time and money in the long run.

Ceramic coatings are advanced coating protection that offers many advantages over conventional sealants and waxes. Ceramic coatings are inorganic compounds, making them much more resistant to corrosion. They also have a low friction coefficient, making them ideal for use in high-wear areas such as vehicles’ front bumper, hood, fenders, and rocker panels. In addition, ceramic coatings can be applied to various surfaces, including metal, glass, plastic, fibre and glass. As a result, they are an ideal solution for protecting surfaces from rock chips, scratches, and other road debris. This blog will discuss some of the most common uses of Ceramic Coatings, which make them an essential part of your vehicle.

Buy Our Super Ceramic Coating DIY Kit Here!

Thermal Barrier Protection From UV Rays

The hot sun can make your car look bad. It attacks the paint clear coat left in its path, damaging it through oxidation and making the paint dull or fade after prolonged exposure to UV rays, which causes various problems, including rusting in a brief period! Thankfully there are ceramic coatings for protecting against this damage by limiting temperature increases, so you don’t have anything happen to your precious vehicle.

The best part about these products? They work great even when exposed to metal surfaces operating near1200°F (650°C).

Makes Your Vehicle Age Like A Fine Wine

Keeps your decade-old vehicle as good as new.

Ceramic coating is a great way to protect your car from damage while still looking good. Ceramic coatings offer more than just protection; they also maintain the glossiness of your paint for longer.
Cars treated with this type tend not to be as prone to dirt build-up or brake dust, making them easier to clean periodically (or whenever) without having too much work on hand compared to traditional waxing options.

Preventing Your Vehicle From Rusting

Protect your precious vehicle from rusting

Corrosion is the natural process by which an electrolyte, anode, and cathode combine to form a bond. It speeds up the rusting process through exposure to harmful elements on any component. Suppose there are scratches or damages in your car’s paint job due to its constant exposure. In that case, each layer will deteriorate until it reaches bare aluminium, where corrosion begins and finally produces rust! This is where Ceramic Coating comes in!

Ceramic coating is a super-concentrated, liquid polymer that seeps into your car’s surface and creates an ultra-smooth hydrophobic finish. The semi-permanent protective layer formed after application blocks UV rays from penetrating through to the clear coat, protecting against contaminants from encountering metal and causing corrosion!!

Protection From Bird Doodoos!

It happens more than you think.

As a vehicle owner, have you ever felt like birds are targeting your vehicle all the time, even when you cannot spot a bird for miles while you park? Let’s get this clear; it’s just worst for one; you cannot wash it immediately if there are loads of them, and then you have to drive with it through the public for miles.

The acid in bird droppings is enough to turn even the freshest coats of paint into a honeysuckle nightmare. This isn’t just because it burns through and stains everything but also because bacteria lurk beneath it! A pH balance as low as 3.5–4 will cause even protection layers on newer cars (or any other surfaces)to wear away within a few weeks.

Ceramic coatings are the ultimate way to keep your car clean, blemish-free, and protected against bad birds. They make removal easy and prevent acidity from seeping through, which would be devastating for any paintwork on a vehicle!

Protection From Acid Rain

Not all rains are good!

Acid rain is a deadly and destructive force that can be felt far beyond the Earth’s surface. It begins when compounds like sulfur dioxide or nitrogen oxides are released into our atmosphere, which reacts with water vapour in high layers of clouds to form more acidic pollutants known as acid rain.

The result? Acid rains are the “world’s worst ecological disaster!”

Acid rain can cause severe damage to your car’s paint, including fading and peeling. The acid in this environment eats away at the metal surfaces, making it difficult for new layers to build up on top, eventually leading clear coat to become worn by exposing raw aluminium beneath! If you live by any bodies Of water, such as oceans or rivers, rest assured knowing that salt from dew and rain also causes damage to your vehicle’s paint.

Ceramic coatings are an excellent way to protect your car from the many hazards of driving on the roads. Like the things mentioned earlier, such as bird pooping, rusting, scratching, and even acid rains! You can use those deep glosses on windshields, too. It also helps with scratching.

Hydrophobic In Nature, Thus Easy Cleaning

The ceramic coating looks good on your car and is also durable. You can wash and wax without worrying about the polymer wearing off because ceramic repels water, so all dirt will bead before sliding off! A quick jet wipe down with a towel gives you spotless paint that’s ageless, too, since this material does not require polish like other types. Just sprinkle the water and wipe it off; it’s that easy with Ceramic Coating.

Do You Want To Read More On This Topic? Check Out These Articles:

• What is Ceramic Coating? The Benefits Of Ceramic Coating and Price.

• Stop Searching For Ceramic Coating Detailers Near You! You can Save Money By Choosing a Super Ceramic Coating DIY Bottle.

• How To Apply Super Ceramic Coating?

Table of contents

• Beading is Not Permanent! 
• Getting Beading without Protection
• How to check ceramic coating IS worn off?

Some customers believe that once the beading ends, the paint is no longer protected by the ceramic coating. It is not true. Water beading isn’t reliant on paint protection to work. It may appear and go at will without affecting the underlying security. For water to bead, your paint doesn’t even have to wear any protection.

Ceramic coating protection isn’t required for water beading. It may appear and go without affecting the underlying layer. Water beading doesn’t even need any protection. So, why is that, and how can you tell whether a vehicle is safe? Here’s how we’ll do it.

Ceramic coating particles are so tiny that when they are put to a surface, they can seal all pores, making the surface hydrophobic (water repellent) and resistant to chemicals, UV damage, high heat, and anti-graffiti. This remarkable Ceramic layer is transparent to the naked eye. The nano ceramic coating seems to establish a semi-permanent connection with a vehicle’s surface, resulting in creating a “sacrificial” layer that is resistant to washing, cleaning, and even rain. It usually lasts for a long time. They resist water and grime like no other material, making them very simple to clean. The hardness makes it simple to avoid swirl marks and tiny scratches while washing.

Beading is Not Permanent! 

The hydrophobic action that causes water to bead is independent of whether or not your paint is protected. Instead, it is based on a concept known as surface energy. For water to be repelled, the surface energy of your paint must be lower than the surface energy of water. Hydrophobic coatings reduce the surface energy of paint, causing water to condense into beads.

However, surface energy can readily change. It rises when your paint becomes filthy or if you use a wetting agent-based fast detailer or car wash soap. If your ceramic coating isn’t beading, you may need to clean it or wash it down with IPA to eliminate any wetting aids.

Buy Our Super Ceramic Coating DIY Kit Here!

Getting Beading without Protection

You’ve seen the products like bead makers, things that cause water to bead up quickly. However, they aren’t actually providing you with any protection. You’ll still have to deal with oxidation and pollutants that cling to the surface.

How to check ceramic coating IS worn off?

The most reliable method is to use a paint thickness gauge to measure the thickness of your paint before covering it. After the coating has dried, take another measurement. After that, make a note of the numbers. When determining if the coating is still there, measure the paint thickness to determine whether it has returned to its pre-coated level.

A paint thickness gauge, however, is not available to everyone. Slickness may serve as a warning sign or a kind of protection. Slide your finger over the paint using the tip of your finger. Do you sense any abrasion? It’s possible that your covering has worn off. Anti-contaminant protection relies heavily on slickness. 

Suppose you have a long-lasting ceramic coating from respectable manufacturers like Super Ceramic Coating that can only be removed by severe abrasion (think machine buffing) and was appropriately applied. In that case, your coating is most likely still intact for at least 2 Years. For longer protection, we recommend you add one top coat every year.

Do You Want To Read More On This Topic? Check Out These Articles:

• What is Ceramic Coating? The Benefits Of Ceramic Coating and Price

• Why You Should Ceramic Coat Your Car and Motorcycle!

Benefits of Graphene Coating

• Exceptional Water-Repelling Capabilities: Setting a new standard for hydrophobic properties, the coating impressively repels water and surface contaminants.
• Reliable and Proven Effectiveness: Gaining the trust of professional car detailers globally, this product comes with a robust guarantee of satisfaction, underscoring its proven performance.
• Long-Lasting Protection: Offering robust protection that lasts over five years, it significantly surpasses traditional products in durability.
• Enhances Visual Appeal with a Lustrous Finish: The coating not only enhances the vehicle’s appearance with deep, captivating reflections but also leaves behind a smooth, satiny surface.
• Effortless, User-Friendly Application: Designed for an easy, do-it-yourself approach, the application process is simple and does not require special tools or extensive experience.

Advantages of Graphene Coating over Ceramic Coating

1. Longer durability than ceramic coating: Ceramic coating for cars is sturdy protection, and its longevity has been one of the major reasons for its recognition in the industry. But it’s exciting to note that with the addition of Graphene, the durability could be further strengthened. Due to its 2-dimensional structure and honeycomb lattice, Graphene is thin, lightweight, and very strong. It allows unsurpassable durability to the surface coated with Graphene. Once applied, you can enjoy the glossy finish of 10 H hardness for 3-4 years. Your crystal shield coating will not wear down due to rain or shine.
2. Ultra-high gloss, depth of colour: The nanoparticle Graphene layer leaves an attractively rich, deepened gloss that considerably enhances the shine and appearance of your paint.
3. Better hydrophobic properties: Graphene has a higher contact angle because of its chemical composition and honeycomb structure, making water slide off easier on the surface than the conventional coating. Less water on the surface means less evaporation, which means no troublesome water spots staying behind your car’s bonnet.
4. Less water spotting: As traditional ceramic coatings are notorious for retaining heat and increasing water spotting, combining them with Graphene makes the top layer of the coating more heat resistant. This ensures you do not have to waste money polishing water spots that have engraved themselves into your car’s surface.
5. Repel Dust: Graphene enjoys privileges based on its chemical properties. To get a little technical, Graphene is said to be “anti-static,” considering its conductivity properties. This implies that it repels dust and other minute or microscopic particles and doesn’t allow them to settle down on the surface coated with it.

Order Graphene Coating

Click Here

Is Graphene Coating better than Ceramic Coating?

You can attain relatively diverse outcomes from the same coffee maker by only changing the coffee beans. That is just the situation with nano-coatings. Graphene and ceramic coating use the same theory, but the finish outcome is considerably unlike. In comparison, both coatings provide fortification against water, UV rays, and grime, and graphene benefits from being the sturdiest substance on the planet. Additionally, it is one of the thinnest and credited to its “one atom” formation. Lighter and sturdier signifies that it can bond to any surface more effectively.

In terms of cost, Graphene is quite costly compared to ceramic coating. However, it is simple to use; Graphene coating does not solidify or crystallize as a regular ceramic, lowering the likelihood of irreparable high spots or streaking. We could think about ceramic coating as an improvement from the usual ceramic coating. Hence, at last, the question arises: Which coating is better? While comparing the benefits offered by both products, it is irrefutably clear that graphene ceramic coats have the advantage over conventional ceramic coatings.
However, graphene ceramic coating is a little pricier than conventional coatings; graphene ceramic coatings have superior properties and added benefits that give you worth for money in the upcoming years. They have better durability and also give generous fortification against scrapes because of superior flexibility. With a stylish coating of ultra-smooth graphene ceramic coating, your luxurious vehicle is certain to grab the attention of others.

How to Apply Graphene Coating?

Humidity and temperature play a big factor in “flash” time (the time between application and when the coating is ready to be wiped off). We recommend applying in temperatures between 65 and 75. Flash time would be expedited in high temperatures, so the first test applying a small section to determine workability before moving into the rest of the vehicle. Graphene coating could be applied to any painted, plastic, or glass surface (including windshield).

To ensure the optimal application of graphene coating, it is essential to meticulously prepare the vehicle’s surface. Here’s How:

1. Initial Cleaning: Begin by thoroughly removing any loose dirt or surface contaminants. This includes cleaning off debris from the paint and fiber surfaces to create a clean base.
2. Contaminant Removal with a Clay Bar: Utilize a clay bar to delicately extract any stubborn, embedded particles from the surface. This step is crucial to prevent any impurities from affecting the coating’s effectiveness.
3. Surface Refinement: Address any visible paint imperfections such as scratches, swirl marks, or signs of oxidation by polishing or compounding the vehicle. Since Graphene Coating forms a semi-permanent layer, it’s vital to correct these defects beforehand, as they’ll be encapsulated beneath the coating.
4. Elimination of Polish Residues: After polishing, it’s important to remove any residual polish oils or substances. A thorough wipe-down with Isopropyl Alcohol (IPA) ensures a clean surface, crucial for the coating’s adherence.
5. Drying Hidden Moisture Spots: Check for and dry any moisture trapped in areas like panel gaps, around headlights, or taillights. This step is essential to prevent any water from seeping out and disrupting the coating’s curing process.

The Application Process

To ensure a successful application of Graphene Coating, strictly follow these steps:

1. Preparation of the Coating: Vigorously shake the Graphene Coating bottle to ensure its contents are well-mixed.
2. Applicator Saturation: Gently pour the Graphene Coating onto your applicator pad, ensuring it’s uniformly saturated but not overly drenched.
3. Starting with Flat Surfaces: Begin with the horizontal or top sections of the vehicle. Apply the coating in straight, slightly overlapping strokes. Focus on manageable sections, roughly the size of a car door or half the hood, adjusting the area size based on the prevailing humidity and temperature.
4. Smooth Application Technique: Ensure the applicator moves smoothly across the surface. If you notice dragging or uneven application, replenish the applicator with more coating.
5. Observing the Bonding Process: Shortly after application, a ‘Rainbow Effect’ will appear, more noticeable on darker colors. This effect, transitioning to a fog-like haze within 1 to 3 minutes, indicates the coating is ready for removal. Note that environmental conditions can affect this timing, so it’s advisable to test a small section first.
6. Residue Removal: Employ high-quality microfiber towels for residue removal. The first pass should eliminate about 80% of the residue, with the second pass clearing the remaining 20%. Use gentle, circular motions with minimal pressure.
7. Inspection for Excess Coating: After wiping, inspect adjacent areas for any overspread of the coating. A flashlight or phone light can be helpful for this. If residue is left unattended for too long, it may cure into a noticeable spot, potentially requiring polishing to remove.
8. Proceeding to Other Areas: Continue this process across the vehicle, treating paint, trim, plastics, and glass in the same manner. Allow at least an hour between layers if adding multiple coats.
9. Drying and Curing Time: Once coated, let the vehicle dry undisturbed for at least 48 hours. The coating continues to cure over approximately 5 days. While it’s okay to drive the car during this period, avoid exposing it to water for optimal curing.

Order Graphene Coating

Click Here

Frequently Asked Questions

Table of contents

• WHAT IS SUPER CERAMIC COATING?
• WHAT IS PAINT PROTECTION FILM (PPF)
• WHAT IS IDENTICAL BETWEEN CERAMIC COATING AND PPF?
• DIFFERENCE BETWEEN PPF AND CERAMIC COATING.
• OFFERS DIFFERENT LEVELS OF PROTECTION
• HOW IS THE APPEARANCE AFTER THE APPLICATION
• WHAT BENEFITS OF APPLYING SUPER CERAMIC OVER PPF?

What is ceramic coating? Can it be applied over paint protection film (PPF)? Are the two compatible, or will the ceramic coating peel off because of the PPF?

We will guide you clearly on it so that you don’t need to get confused about which works best for your car next time. Before we begin, we would like to guide you on the ceramic coating and how it differs from PPF.

WHAT IS SUPER CERAMIC COATING?

The ceramic coating acts as a protective layer for paintwork. The gloss and hardness of the ceramic coating help to prevent paint damage, like swirl marks and waterdrop stains.. These coatings can be applied to all sorts of vehicles, giving them an amazing finish! The ‘Nano’ refers to both sizes-the molecules used for protection as well as our modern understanding of these materials, which has grown drastically over time since their discovery by NASA scientist Dr Harry Nelliste back when they were called space filings (which is what gave us ceramic).

It is a much-needed coating for all sorts of automobiles to get a fantastic paint finish. The liquid forms a microscopic layer over the original paint for protection .when it is applied, it sweeps into tiny imperfections found in a clear coat to create a flat surface and makes it glossy and shiner. The size of the coating particles is tiny; it fills all the imperfections in the clear coat and makes it resistant to UV rays, dust, chemicals, bird droppings, scratches, and extreme heat.

Buy Our Super Ceramic Coating DIY Kit Here!

WHAT IS PAINT PROTECTION FILM (PPF)

Nowadays, it is seen that many auto enthusiasts were talking about paint protection film or (PPF) What is it for real? Does it better than ceramic coating? These questions will pop up in many individuals, And are often misguided. First, the PPF or paint protection film is a thermoplastic urethane film installed on top of car paint, usually clear, to display the freshly finished paint underneath. Also, car owners can buy different colour variants of protection film if they wish. PPF, or clear bra, is very resistant to corrosion, bird droppings, and road grime, just like the ceramic coating. It also has all the features offered by ceramic coatings, like scratch protection and hydrophobic effect. What it attracts is it has self-healing properties towards minor scratches. In India, if you wish to apply for a ppf, it is quite costly, and a common person cannot afford it.

Buy Our PPF Ceramic Coating Here!

WHAT IS IDENTICAL BETWEEN CERAMIC COATING AND PPF?

If you have used a car wax or any sort of polish to protect your daily driver or garage queen and are now looking for a compelling upgrade, a ceramic coating or PPF coating will fulfil expectations.

Although the ceramic coating and PPF are greatly not identical in production, both give similar protection attributes and a relatable finish over car paint. We would always suggest getting paint correction and some preparation work before applying either. Here are some advantages of both ppf and nano-coating.

• PROTECTION AGAINST HARSH ELEMENTS

One of the common reasons for the paint to be damaged is ultraviolet rays or UV rays. Another strong factor is excessive heat or acid rain. Even smog contains dangerous contaminants which eat away paint clear coat eventually if it’s not protected. This is where the importance of PPF or nano-coating. A ceramic coating produces a very hard shield to block UV rays, acid rain, and smog, from attaching to the paint surface. The PPF does the same job but is a much softer material.  

• PREVENTS COLOUR FADE

The sun is already shining brightly in India, and while it is totally welcome. It poses some trouble to those who want to keep their car’s cosmetic appeal in tip-top shape. One of the biggest questions we receive is how to protect cars’ paint from harsh sunlight when it comes to the automotive industry. Today, in this post, we will try to outline the most common reason behind car paint fading and look at some possible ways to get rid of it. Also, treatments you can use to protect that coat of paint from fading.

We all know that car paint will begin to fade when the clear coat is damaged. The leading factors for this are UV rays, chemicals, and acids. The main reason why people use ceramic coating or ppf as a shield: both are heat resistant and can protect against colour fading for up to 5 years. Firstly, the ceramic coating contains SIO2, which is silica dioxide.SiO2 is an inorganic metal oxide that has a diameter smaller than 100 nanometres. When it hardens and is buffed off, it forms a crystal layer on the surface area. The higher the SIO2 content, the harder and long-lasting it is. The Sio2 percentage of super ceramic is 80%.which is fair enough to resist harsh light and chemical contamination

• KEEPS PAINT FRESH AND CLEAN

We would highly request you to polish the paint and clear coat factory paints underneath before jumping into PPF or Nano-coating (super ceramic coating ). This process often helps to achieve amazing shine. Since a coating hardens as glass, it modifies the undercoat brilliance of freshly polished paint. Similarly, PPF helps to keep the bad stuff from penetrating; thus, paint looks fresh and clean for years.

• PROTECTION FROM SWIRL MARKS AND SCRATCHES

Many individuals use wax or regular polish, or even paint sealants to remove swirl marks and scratches. How is it formed? Sometimes we get stuck thinking of it. Even though we take good care of car paint, swirl marks will form automatically. You should know that these didn’t form automatically. It is only b when washes the car with a dirty towel. What happens is that dirt, debris, or microscopic imperfections in the materials will grind into the clear coat. As you literally grind the debris into the clear skin (in a circular motion), it causes scratching occurs. Either paint protection film or a durable ceramic coating can protect it.

DIFFERENCE BETWEEN PPF AND CERAMIC COATING.

Although there are similarities with both ppf and ceramic coating, there are a few areas where they stand distinct. Firstly, a ceramic coating is a liquid product, whereas the ppf is polymer or vinyl. The ceramic coating is applied to the paint using a sponge and is spread on the paint surface; wait for it to dry and wipe it off gently. However, PPF is installed by laying the vinyl material on the surface, smoothing out all bubbles and imperfections, and then using a hot air machine to adhere to the paint. Beyond the materials and the installation techniques, there are other differences between these two products.

OFFERS DIFFERENT LEVELS OF PROTECTION

A ceramic coating offers a different form of paint protection compared to ppf (paint protection film). A ceramic coating is a transparent layer, making car paint more shiny and glossy. One good advantage of such a coating is that it helps clean cars more efficiently and quickly. Generally, the coating will last up to 2-3 years, .but this depends on how you are taking care of the coating. A ceramic coating is also called Nano-coating. A high-quality ceramic coating is maintained by washing your vehicle every two weeks. Once the ceramic is applied, you should know that you don’t need to apply anything besides ceramic to improve paint protection, shine, or water resistance.

However, talking about ppf (paint protection film) helps to protect from small debris, including pebbles, dust, and other debris that gets kicked up due to traffic and blowing wind. Keep in mind that PPF is not bulletproof, but if small rocks or sticks hit your car, it’s less likely to penetrate the PPF material. Moreover, when a small rock or other debris hit the ppf , it is expected to cause minor scarring. Finally. one attractive thing about ppf is it can heal itself, blow some air over the scratch, and it will fuse

HOW IS THE APPEARANCE AFTER THE APPLICATION

The PPF tends to produce a blurry or fuzzy appearance on the paint surface, and It is not very hydrophobic. In fact, PPF will become dirtier than non-paint protection since the material tends to absorb dirt and other materials.

When you are making the decision whether to apply a ceramic coating or a ppf film. It breaks into two options. First is your ‘budget’, and second is your needs. Here, I would suggest you think consciously. If you are looking to improve your car’s overall look by making it shine and gloss and reducing the need for frequent wash, then ceramic coating or nano-coating works best for you.

With ppf coating, if you are protecting your vehicle from dust and small rock debris that can penetrate with ceramic coating, then PPF is best for you.

Although ppf provides a little more protection from small rocks and all, it doesn’t mean that it is affordable .it is very costly compared to products like super ceramic coating. PPF is far and away from the most expensive paint protection product to use. It’s always installed by a professional, and in most cases, it can cost up to 375,625 INR to apply to the entire vehicle, whereas the super ceramic cost 1200 rs which is great value for money.

WHAT BENEFITS OF APPLYING SUPER CERAMIC OVER PPF?

If you are looking for the ultimate layer of protection, consider applying a Nano-coating or DIY ceramic coating as the top coat of a PPF, The ceramic coating will stick to the ppf and you will be able to improve a few drawbacks of PPF protection.

• IMPROVES HYDROPHOBIC PROPERTIES

Earlier, we mentioned that the ppf can only offer a little hydrophobic effect; this results in enhanced water spots but also tends to cause dirt and debris to stick to the PPF. When you apply the ceramic coating, you’ll reverse this attribute and turn it into a positive feature.

• ENHANCE SELF-CLEANIN

The PPF coating and ceramic coating are good enough to protect from dirt and debris; therefore, you will spend less time cleaning your car.

• EXTEND LIFE OF PAINT PROTECTION FILM

Do You Want To Read More On This Topic? Check Out These Articles:

• What is PPF (Paint Protection film)? which is better PPF or ceramic coating? Exploring the Benefits, Drawbacks and Best Practices!

• What is Ceramic Coating? The Benefits Of Ceramic Coating and Price

• Why You Should Ceramic Coat Your Car and Motorcycle

What is the cause of High Spots?

Highspots occur due to various reasons. The most common cause is not buffing the coating properly after applying the ceramic coating. When applying the ceramic coating, you should be working on small sections/panels of the car at any one point. You should spend time on that section and ensure the coating is levelled and residue removed using buffing with a microfiber cloth before moving on to the next area.

It is very easy to miss unless you work with appropriate lighting. That’s why we recommend using a flashlight for inspection after the coating. Another best way to inspect the coating is to check it on a cloudy day. During a normal sunny day, due to the different lighting sources and everything the coating may look levelled up or perfect but when you check the same vehicle on a cloudy day, you may find a dark patch or high spot. 

Also Read: How To Apply Super Ceramic Coating?

Things to keep in mind for avoiding the White Marks

• Do not get too much ceramic coating on the applicator
• Apply the coating even and optimum pressure on the applicator 
• Do not squeeze out 
• Slightly overlapping each wipe, ensuring the same on cross-hatch strokes. 
• Most people tend to work in large areas or sections for ease, but it makes the levelling difficult and gradually, it leads to high spots.  
• In summary, you need to allocate around 1- 2 hours for ceramic coating, depending on the size of your vehicle. Apply the coating responsibly.

What to do when you find a high spot?

There are numerous techniques to get rid of the high spots. These techniques mostly depend upon the amount of time the coating has been applied. It’s necessary and important to look for high spots as early. The earlier you find it, the better you can fix it. 

1)  USE MICROFIBER CLOTH TO LEVEL THE COATING 

Using a microfiber cloth to level the coating can be of great help if you find the high spot soon, I.e.just after you apply. When the coating cures, it becomes hard, and after a span of time, the hardness can’t be levelled with a microfiber cloth. So make sure to look for high spots soon after your coat. Inspect the vehicle using a flashlight. You can use your mobile flashlight too.

2) APPLY COATING TO THE HIGH SPOT 

When wiping with a microfiber cloth doesn’t work, you can try applying a small layer of coating over the area. It makes the high spot invisible. Make sure not to apply a huge amount of coating over a high spot it can worsen the condition. Only use 1-2 drops on the applicator. Then buff off with a separate microfiber, but do this fairly quickly.

3)  POLISH WITH HAND TO REMOVE THE COATING 

When wiping with a microfiber cloth and applying a ceramic coating over the high spot doesn’t work, you can try to remove the coating to level or flatten the high spot.  Sometimes less work is required to remove the coating, depending on when the coating has settled on the paint. We made Marine Paste Ceramic Coating Remover to make it easy for you to remove the ceramic coating and high spots without damaging the paint. The marine paste is clear coat safe and it won’t affect the original paint, unlike normal rubbing compounds. Also, it can remove tiny scratches and swirl marks. Optionally, you can apply the Paste Wax to bring back the glossiness.

4) MACHINE POLISH TO REMOVE THE COATING 

If all the above techniques fail to make the high spots invisible, you’re left with the option of machine polish. This only happens in rare cases where you ignored the high spots for a really long time (More than 2 months) and the coating bonded with the paint solidly. This technique is only meant for worst-case scenarios, as you will have to remove the ceramic coating in this process. Machine polishing can remove any hard high spots or any other paint defects.

You can apply the ceramic coating again to the high spots removed areas, Don’t worry. There won’t be any visible layering on the surface by reapplying.

 SINGLE TIP TO AVOID ANY MISHAP: DO NOT RUSH THE PROCESS. GO SLOW, GO EASY, GO CAREFULLY!

HAPPY DETAILING ^___^